Acrefine AVI-R type rubber mounts are designed to minimize vibration and noise transmission from floor mounted equipment. The equipment is bolted directly to the steel insert embedded in the rubber.
Vibration isolation is achieved by rubber designed to be governed by the shear modulus. This allows for increased strain, and deterioration is minimized. Rubber elements are grouped by their ‘Shore A Hardness’ which corresponds to different load ranges. There are three groups, each colour coded for easy identification and to promote correct installation.
Acrefine AVI-R type vibration isolators are suitable for floor mounted mechanical equipment that generates high frequency vibration i.e. pumps, centrifugal fans, blower-coil units, vent sets, low pressure packaged air-handling units, etc.
AVI-R type seismically restrained rubber mounts are available with up to 3 mm (1/8″) deflection and load capacity up to 1254 kg (2765 lb). For higher load capacities please contact us
You must first sign in or register to gain access to Acrefine downloads.
Here you will find product brochures, technical specification documents, installation guides and much more.
I’m already Registered:
I’m New to Acrefine:
